Zentech DF2000 Anleitung zur Fehlerbehebung PDF herunterladen (Seite 66)

converter box and Set-Up #1, you can watch and record one channel at a time. If you use two

converter boxes and Set-up #2, you can watch one channel while recording a different channel.

Set-up #1:

Watch and Record One Channel at a Time

Your new Converter box will come with a second coaxial wire and a remote control. Before you

begin, you should unplug the power from your TV, VCR, and antenna, if you are using an

indoor, amplified antenna.

Step 1. Unplug the existing coaxial antenna wire from your VCR “Antenna In (RF)” port.

Step 2. Plug the existing coaxial wire into the “Antenna In (RF)” port on your Converter Box.

Step 3. Using the coaxial wire that comes with your Converter Box, plug one end into the “Out

To TV (RF)” port on the Converter Box. Plug the other end into the “Antenna In (RF)” port on

your VCR.

Leave your connection from the VCR to the TV as is (either an A/V cable or Coaxial Wire).

Step 4. Plug the power cords on your Converter Box, VCR, TV, and antenna, if you are using an

indoor, amplified antenna, into a power outlet, and turn the devices on. Tune your VCR to

channel 3 or 4 (follow the instructions in the converter box manual), and set your TV to display

video from your VCR. Using the remote that comes with your Converter Box, follow the on-

screen set-up guide to scan for available DTV channels, and begin enjoying the benefits of

Digital Television! You will be able to record programming on the channel you are tuned to on

your converter box.

Set-up #2: Watch One Channel while Recording a Different Channel

You will need your analog TV, the antenna you have been using (indoor or outdoor), the coaxial

wire that currently connects your antenna to your TV (as pictured on the far right), four

additional lengths of coaxial wire, a set of A/V cables (as pictured on the right), a 2-way splitter,

and two converter boxes. Your new Converter boxes will each come with a coaxial wire, a set of

A/V cables (three wires with red, white and yellow plugs), and a remote control. Before you

begin you should unplug the power from your TV, VCR, and antenna, if you are using an indoor,

amplified antenna.

Step 1. Unplug the existing coaxial antenna wire from your VCR “Antenna In (RF)” port.

Step 2. Unplug coaxial wire #2 from your VCR “To TV (RF)” port. Leave the other end of wire

#2 plugged in to the TV.

Step 3. Plug the existing coaxial antenna wire into the “In” port on your 2-way splitter.

1 2 ... 61 62 63 64 65 66 67

Keine Kommentare

Zentech DF2000 Anleitung zur Fehlerbehebung Seite 66